Call Us/new-equipment/mahindra-equipment/ 2540 Shuttle
2500 2540 Shuttle
Overview:
A solid choice for general-purpose farming, agriculture, livestock and grounds maintenance, this tractor is an economical and easy to operate 4WD, Tier IV workhorse. Powered by our unique mCRD™ engine technology for reduced emissions, this tractor provides reliable performance and added fuel efficiency. Available in 37... + Read More
Features
- Wide entry
- Powerful, reliable 40 hp 4-cylinder engine
- Flat deck platform
- Modern dash and switches
- Redesigned front grill
- 2 spool optional rear remote valve
- Hood lifts high, panels come off, no tools required
- Tilt Wheel
- Great visibility
- Rounded fenders
- Shifters at operators sides, not on the floor
- Great serviceability access
- Adjustable Suspension seat
- Comfortable padded rubber floor mat
- Redesigned headlight assembly
- Heavier three point linkage
Specifications
| Tractor | 2540 Shuttle |
| ENGINE | Shuttle |
| Type | Naturally aspirated |
| direct injection diesel | |
| Cylinders | 4 |
| Engine HP (kW) @ rpm (EPA Certification) | 40 (29.4) @ 2600 |
| Compression Ratio | 19.5:1 |
| Displacement cubic inch3[cc] | 166.7 (2730) |
| Fuel Tank Capacity | 9.0 gallons |
| ELECTRICAL | |
| Battery Capacity | 12 volt, 96 amps |
| Alternator | 12V 45A |
| CLUTCH | |
| Type | Single plate, dry |
| TRANSMISSION | |
| Type | Sync, shuttle w/ part synchromesh |
| Number of Gears / Speeds | 12F / 12R |
| STEERING | |
| Type | Hydrostatic/ Tiltable |
| Pump Out [gallons per minute] | 4.5 |
| BRAKES | |
| Type | Wet disc |
| HYDRAULIC SYSTEM | |
| Type | Open Center with telescoping stabilizers & flex link ends |
| Pump Out [gallons per minute] | 8.2 |
| 3-Point Linkage | Category 1 with check chains |
| Lift Capacity [lbs.] | 2645 |
| Rear Auxilary Remote Valves | 2 spool optional |
| PTO | |
| Type | Independent |
| PTO RPM [engine rpm] | 540 @ 2650 |
| PTO HP [kW] | 35 (26.1) |
| OPERATING WEIGHT | |
| Total(lbs.) | 3285 |
| DIMENSIONS with Ag Tires | |
| Overall Length Inches [mm] | 119.3 (3030) |
| Overall Width Inches (mm) | 59.8 (1520) |
| Turning Radius Min. Feet (meters) | 7.87 (2.4) |
| Overall Height inches (mm) | 94.4 (2400) |
| TIRES Sizes and Options | |
| Ag (Front/Rear) | 8.3x16 / 12.4x24 |
| Industrial(Front/Rear) | 10-16.5 / 43x16-20 |
| Turf (Front/Rear) | N/A |