Vermeer TM710 Trailed Mower

Double tap to zoom



  • Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.
  • Goes easy on horsepower, only requiring a 55 hp (41 kW) tractor for a 9.2 ft (2.8 m) cut.
  • Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.
  • Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.
  • Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.


Dimensions and Weights - Approximate  
Transport Height 46" 116.8 cm
Transport Width 9.4" 2.9 m
Transport Length 15.3' 4.7 m
Working Height 46" 116.8 cm
Working Width 13.6' 4.1 m
Working Length 14.3' 4.4 m
Total Weight 2200 lbs 997.9
Tongue Weight 630 lbs 285.8 kg
Tires 27 x 9.5 - 15
Tractor Requirement  
Minimum Horsepower Required 55 hp 41 kw
Hydraulic requirements 2 aux remotes (1 with optional kit)
Flow rate 6 gpm 22.7 L/min
Hydraulic Pressure 1250 psi 86.2 bar
Cutting bar 9.2 ' 2.8 m
Number of Discs 7
Disc Diameter 19.7" 50 cm
Disc Speed 2797 rpm
Number of Knives 14
Cutterbar Angle 0-6º
Angle Adjustment Manual turnbuckle
Disc Type Quick-Clip blade retention system
Skid Shoes Modular independent skid shoes
Standard Features  
Warranty One year limited warranty and three year limited cutterbar warranty
Safety Equipment SMV sign
Mower suspension Rubber torsion
Torque Protection - Driveline Friction disc clutch
Single Tractor Outlet Hydraulic Kit For tractors with only 1 aux remote