Call UsHayBuster 2100 Balebuster
Bale Processors 2100 Balebuster
Overview:
The 2100 Balebuster is the original bale processor from Haybuster. It remains very popular due to its simplicity and versatility. Two-point mounted on the tractor with rear caster wheels to support the load of the machine and the bale. Being semi-mounted to the tractor, the 2100 is easy to maneuver. Just back into a ba... + Read More
Features
• Tractor Semi Mounted, for easy maneuvering & positioning of straw.
• Rear caster wheels to support weight of machine and bale.
• Heavy-duty loader for easy bale loading. Just back into bale, hydraulically roll shredder frame which loads the bale.
• Heavy-duty chain conveyor with more durable chain and heavier drive shafts.
• 1000 RPM drive that can throw straw up to 40 feet.
• Easily adjustable deflector for feeding or bedding.
Optional Features:
- Stripper channel kits
- Category II/III Quick-Tach Hitch
- Wide Deflector Belt
Specifications
| WEIGHT | - |
| Total | 3,700 lbs. (1,679 kg) |
| SHIPPING DIMENSIONS | - |
| Width | 8 ft. 5 in. (2.6 m) loader & deflector folded. |
| Length | 12 ft. 9 in. (4.01 m) |
| Length | 8 ft. 5 in. (2.6 m) caster wheels removed. |
| Height | 6 ft. 5 in. (1.96 m) loader folded. |
| TRANSPORT DIMENSIONS | - |
| Width | 10 ft. 8 in. (3.25 m) |
| Length | 12 ft. 9 in. (4.01 m) |
| Height | 6 ft. 5 in. (1.96 m) loader folded |
| WORKING DIMENSIONS (WITH BALE) | - |
| Width | 13 ft. (3.96 m) |
| Length | 12 ft. 9 in. (4.01 m) |
| Height | 9 ft. 8-3/4 in. (3.05 m) |
| CHASSIS FEATURES | - |
| Hitch | Semi-Mounted, attaches to lower Lift Links of Tractor's 3-PT Hitch< |
| Tires | (2) 9.5 x 14 - 8-Ply |
| Wheels | (2) 6 x 14 - 5 Bolt Drop Center |
| BALE CONVEYOR | - |
| Type | 3 Roller Chains with Bolt-on Cross Slats |
| Drive | Hydraulic Motor with Hydraulic Flow Control |
| BALE SHREDDER CHAMBER | - |
| Max. Bale Size | 5-1/2 ft. long x 6-1/2 ft. dia. (1.68 m x 1.98 m) |
| Max. Bale Weight | 1,500 lbs. (682 kg) |
| Rotor Length | 78 in. (1.83 m) |
| Rotor Diameter (Flails extended) | 25-1/2 ft. (64.77 cm) |
| Rotor Bearing | Ball, 1-3/4 in. (4.44 cm) |
| Number of Flails | 30 |
| Flail Type | Heavy Duty Flails, 7/16 in. (11.11 mm) Thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging |
| Number of Stripper Plates | 1 |
| Number of Slug Bars | 5 |
| Deflector Shield | 6 Adjustment Positions through 120 degree range |
| Max. Horizontal Spread | Straw up to 50 ft. |
| OPERATOR CONTROLS | - |
| Loader | 1 set of Tractor Hydraulic Outlets |
| Bale Conveyor | 1 set of Tractor Hydraulic Outlets |
| Bale Conveyor Speed | Adjustable Hydraulic Flow Control Valve |
| Slug Bar | Shim adjustable |
| Deflector Shield Position | Hand Lever with Position Settings |
| REQUIREMENTS FOR OPERATION TRACTOR | - |
| PTO Horsepower required | 65 to 155 |
| hree Point Hitch | CAT II / III |
| Min. Hitch Lift Capacity | 4,000 lbs. (1,818.18 kg) |
| PTO Type | 1000 RPM, 1-3/8 in dia Shaft with 21 Splines |
| Min. Hydraulic Output | 8 gpm at 1800 psi (46 lpm x 10,345 kPa) |
| Hydraulic Remote Controls | 2 Double-Acting Control Valves with Quick Coupler Outlets |
| Tractor Weight | Must be of equal or greater weight than that of a 2100 BALEBUSTER and 1 Bale |