Call UsKrone EasyCut R 400
Rear-Mounted Disc Mower EasyCut R EasyCut R 400
Overview:
3.60 m or 4.04 m working width
Forming two swaths or spreading the material
Hydraulic cutterbar suspension is available as an option
Excellent value for money
Features
The cutterbar
- Fully welded: Robust, sealed and permanently lubricated
- The durable satellite drives have massive spur gears for quiet running and superior efficiency
- No inner shoe for trouble-free cutting
SafeCut
- Full driveline protection for added reliability
- Neighbouring discs will not collide
- Wear-free
- Quick-change roll pins for minimum downtime and costs
SmartCut
- The wedge-shaped cutterbar guarantees clean cuts
- Heavy-duty spur gears run in widely-spaced double bearings
- Swathing or spreading depending on needs
DuoGrip
- The DuoGrip system – centre-of-gravity suspension and linkage control
- Uniform ground pressure across the entire work width
- Excellent guidance: less side thrust, clean cuts
- Short and high-strength beam
High work rates and clean cuts
- Suspension springs with central control ensure uniform cuts and an optimum ground pressure
- Ground pressure control without tools
- Hydraulic ground pressure control is an option
- Two-fold impact damage protection
Safe road travel
- The unit folds into an over-centre position, reducing the transport height and optimising the weight distribution and view to the rear
- The unit is lifted hydraulically and without raising the tractor links to make the headland turn
- Large suspension travel
Specifications
| Rear mowers | EasyCut R 400 |
| Work width Approx. m | 4.04 (13'3") |
| Transport height Approx. m | 1.50 (4'11") |
| Vertical transport position | - |
| No. of discs | 7 |
| No. of top hats | 2 |
| SafeCut | Standard |
| Quick-change blades | Standard |
| pto speed rpm | 540 |
| Optional pto speed (rpm) | 1,000 |
| Dead weight Approx. kg (lbs) | 1,050 (2,315) |
| Tractor power kW / hp | 66/90 |
| Mechanical ground pressure control | Standard |
| Hydr. Setting the ground pressure | Option (1 x da) |
| Hydraulic spools | 1 sa 1 da |
| Lower link pin | Cat II/III |
| Area output approx. ha/h; (acres/h | 4.5-5.0 (11-12.4) |
All specifications, weights and dimensions do not necessarily comply with standard specifications and are therefore not binding. All product specifications are subject to change.