Kuhn Master 103 2E
Double tap to zoom
Heavy-Duty Components to Ensure a Long Machine Life
Simple adjustment of leveling by stops. Easy storage with built-in toolbox in head-stock on 3- and 4-bottom NSH models.
High Strength Frame
Simplified adaptation to tractor wheel setting. Mechanical adjustment of plow angling (front furrow width).
Moldboards are made of unequal layer, heat-treated Triplex steel that have an increased working life up to 40% over standard steel and a hard wearing surface over 1/8” thick.
Standard Rubber Depth Wheel
The depth wheel follows any change of plowing width. It features simple bolt adjustments with the ability to set left and right sides independently. It can be placed in many locations on the frame to ensure optimum positioning for all conditions.
|Model||MASTER 103 2E|
|Number of bottoms per side||2|
|Extendable by one bottom||Yes|
|Standard moldboards||H4 long helicoidal|
|Hydraulic rollover with 1 cylinder||Standard|
|Maximum tractor power||60 hp (45 kW)|
|Approximate machine weight for T version||1,168 lbs (530 kg)|
|Approximate machine weight for NSH version||1,488 lbs (675 kg)|
|Working width||14" or 16" (35 or 40 cm) delivered at 16" (40 cm)|
|Underbeam clearance||27.5" (70 cm)|
|Point to point clearance||35" (90 cm)|
|Offset and angling adjustment||Mechanical|
|Hitch||Cat. 2 swift hitch|
|Main beam dimension||3.9" x 3.9" (100 x 100mm)|
|Extension beam dimension||3.9" x 3.9" (100 x 100mm)|
|Required tractor hydraulic connections||1 DA for rollover|
|Adjustable depth wheel with tire||600 x 210 mm standard|
Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.