Kuhn Vari-Manager 6E
Double tap to zoom
Non-Stop Hydraulic (NSH) Reset
When a field obstacle is met, a rapid breakaway of the plow leg occurs. Once the obstacle is passed there is an increase in pressure, bringing the bottom quickly and firmly back into working position. The system also acts as a shock absorber in rocky ground, increasing plow life.
Headstock with Heavy-Duty Articulation
The swift hitch cross shaft is positioned low on the machine for the best possible weight distribution and maximum traction in difficult conditions.
Moldboards are made of unequal layer, heat-treated Triplex steel that have an increased working life up to 40% over standard steel and a hard wearing surface over 1/8” thick.
The H4, helicoidal, Scandinavian-type moldboard provides well-formed plowing to a normal depth range of 7-12”. The share is fitted with a reversible/replaceable point that greatly increases the life of the share. Recommended for fall plowing, the H4 moldboard is especially suited for heavy and damp clays. Furrow passes are well defined and trash burial is excellent.
The helico-cylindrical N moldboard plows to a depth of 14”. Designed to be a highly versatile body, it is cylindrical at front, helicoidal at rear. A low draft ensures a partly broken furrow with excellent trash burial. Recommended for spring plowing, this moldboard is versatile and works well in sandy or clay soils.
Olympic® Share Points
Reversible for maximum efficiency. More pronounced shape at wearing zones on the point for longer life and better protection of the landside. Point is self-sharpening for good ground penetration at all times.
In the tractor cab, the same lever controls both lifting out of work and rollover of the plow in one combined automatic operation; greatly simplifying headland maneuvers and reducing operator fatigue.
The beam articulation allows the plow to follow undulating terrain for a constant plowing depth along the length of the plow. When coming out of work, while the front bottoms are lifted out of the ground, the rear bottoms remain at a constant working depth, improving the headlands for a neater field finish.
Large Hydraulic Offsetting Adjustment
Large adjustments can be made to the plow offsetting (its angle in relation to the tractor) from the tractor seat by activating one of the hydraulic valve levers. This allows for easy adaptation to all possible tractor inter-wheel distances.
The two-wheel undercarriage results in a substantial reduction in the strain put on the tractor hitch arms during rollover.
|Number of bottoms per side (front + rear)||6 (4+2)|
|Extendable by one bottom||Yes, at front|
|Standard moldboards||L : Wide helicoidal|
|Hydraulic rollover with 2 cylinders||Standard|
|Minimum allowable power||132 hp (97 kW)|
|Maximum tractor power||180 hp (132 kW)|
|Approximate machine weight for NSH version||7,716 lbs (3500 kg)|
|Working width||12" to 20" (30 to 51 cm) hydraulically adjustable|
|Underbeam clearance||31.5" (80 cm)|
|Point to point clearance||40" (102 cm)|
|Two-wheel undercarriage with suspension for transport||Standard|
|Sequencing valve - combines lift and rollover functions||Optional|
|Hitch||Cat. 2 with cross-shaft|
|Beam dimensions||7.1" X 7.1" (180 x 180 mm)|
|Offset and angling adjustment||Hydraulic|
Product specifications are based on published information at the time of publication.
Product specifications are subject to change without further notice.
Contact your local KUHN Dealer for more information.