Vermeer BPX9010

Double tap to zoom



  • The power of the BPX9010 bale processor is distributed through two gearboxes. The design allows operators to expect less maintenance and help increase durability and efficiency when compared to chain or belt driven processors.
  • The BPX9010 bale processor has the versatility to process square bales with the optional powered sidewall kit and optional straight fork kit.
  • The slat and chain bale rotation design feeds the bale consistently into the rotor – reducing the need for reverse rotation.
  • The new toolless cut control bar design allows dual adjustments for increased aggression easily accessible from outside the machine. Ten different settings allow producers to be in control of processing speed and material size.
  • The rotor cleaner attachment on the cut control bar can be set to the self-cleaning position to help reduce excessive net and twine on the rotor, or set to the manual clean position to help minimize the amount of net or twine mixed in the feed.
  • A vertical bale lift system makes it more efficient to load bales and reduce stress on the machine. Plus, the robust T-style tongue frame has no welds or gussets at high stress points and is bolted high on the tub.
  • An offset rotor pulls material through for more consistent feeding and helps prevent uncontrolled fall-through from slowing down the machine. Process whole bales of varying shapes (with a powered sidewall kit) and qualities to produce uniform windrows, hit tight spots along the bunk line or spread evenly up to 50 ft (15.2 m) for bedding.
  • The BPX9010 bale processor features a redesigned tub profile to help maximize productivity and reduce the chance of plugging.


Dimensions and Weights  
Length 15.6 ' 4.8 m
Height 8.5' 2.6m
Width - Transport 8.2' 2.5m
Width - Operation 11.2' 3.4m
Weight 1480 lbs 671.3kg
Drawbar Weight 1460 lbs 662.2kg
Tractor Requirements  
Horsepower Required 85 hp 63.4 kw
Horsepower maximum 210 hp 156.6 kw
PTO speed 1000 rpm
Hydraulic type 3-Double-Acting
Hydraulic Pressure 2000 psi 137.9 bar
Hydraulic flow rate 8 gpm 30.3 L/min
Standard Details  
Axle adjustment 12" (30.5 cm) each axle
Bale rotation 3 roller chains with bolt-on cross slat
Bale size capacity Two bales, 6' x 5' (1.8 m x 15 m)
Bale weight capacity 2500 lbs 1134 kg
Cut Control Bar Adjustment Hand lever with 5 settings
Cut Control Bar Quantity 7
Discharge Direction Right hand
Flail description 7/16" x 5-9/16" tempered spring
Flail Drum Diameter 26.8" 68.1 cm
Flail Drum Length 78" 198.1 cm
Flail Drum Speed 1000 rpm
Flail Quantity 30
Horizontal spread distance 50' 15.2 m
Tire Size - standard 14L x 16.1 FL
Torque Protection - Driveline Shear bolt
Hitch Jack 5000 lbs 2268 kg
Safety chain kit 10000 lbs 4535.9 kg
Optional Features  
Extra Cut Control Bars Kit Yes
Flotation Tires 16.5L-16.1SL 6 SOFTRAC II
Hydraulic Cut Control Bar Kit Yes
Square bale kit Yes
Two hydraulic remote kit Yes
Automatic bale feed system kit N/A