Call UsVermeer FPX9000
Bale Processors FPX9000
Overview:
The Final Cut™ FPX9000 bale processor from Vermeer allows you to process the amount of forage material you need, on your own time. Optimal cut length for feeding cattle is achieved as material passes through multiple cut points. The Final Cut processor is ready for windrow or bunk feeding, or processing material into a... + Read More
Features
CONSISTENT CUT SIZE
A primary rotor cuts the initial pieces of crop from the bale before delivering it to the high-speed rotor knives. The high-speed rotor chops the crop further before sending it back through the primary rotor and ejecting it from the machine. These multiple touch points provide consistency of cut size throughout the entire bale.
VERSATILITY
The Final Cut FPX9000 is ready for windrow and bunk feeding, or processing material into a bunker and other storage items for mixing rations later. An optional powered sidewall allows you to process round or square bales.
EASY MAINTENANCE
Bales are consistently fed into the primary rotor, reducing the need to reverse rotation. This slat and chain bale rotation design allows for easy maintenance without the need to remove the entire rotation bed and reduces the need to replace bushings and buildup.
DURABLE INTERMESHING FLAILS
Lessen the chance of unprocessed crop being fed through the machine with durable intermeshing flails on the primary rotor and high-speed rotor. These components produce a better consistency of processed material and reduce twine and net buildup.
DUAL DIRECT DRIVE GEARBOX
Powerful and even distribution of material out the right-hand side of the machine is achieved with the dual direct drive gearbox. The benefit of this design delivers greater durability and requires less maintenance.
Specifications
| Dimensions and Weights | |
| Length | 15.8 ft |
| Height | 8.8 ft |
| Transport Width | 8.4 ft |
| Working Width | 12 ft |
| Weight | 6280 lbs |
| Drawbar Weight | 1900 lbs |
| Axle adjustment | 12 in (30.5 cm) each axle |
| Tires | Standard: 14L-16.1FL; Optional: 16.5L-16.1SL 6 SofTrac II flotation tire |
| Tractor Requirements | |
| PTO horsepower minimum | 110 hp (82 kW) with automatic bale feed; Without automatic bale feed, use recommended PTO horsepower |
| PTO horsepower recommended | 150 hp |
| PTO horsepower maximum | 210 hp |
| PTO Speed | 1000 rpm |
| Hydraulics type | 3 - double acting |
| Hydraulic Pressure | 2000 psi |
| Hydraulic flow rate | 8 gpm |
| TUB | |
| Bale rotation | 3 roller chains with bolt-on cross slat |
| Bale size capacity | (2) bales, 6 ft x 5 ft (1.8 m x 1.5 m) |
| Bale weight capacity | 2500 lbs |
| PROCESSING SYSTEM | |
| Cut Control Bar Adjustment | Hand lever with 5 settings |
| Cut Control Bar Quantity | 7 |
| Flail description | Dual 1/4 in (0.6 cm) blade x 5-1/2 in (14 cm) |
| Flail Drum Diameter | 26.8 in |
| Flail Drum Length | 78 in |
| Flail Drum Speed | 1500 rpm |
| Flail Drum Quantity | 60 |
| High-speed rotor flail description | 3/16 in x 6-11/32 in (0.5 cm x 16.1 cm) in reversible knives |
| High-speed rotor diameter | 22.2 in |
| High-speed rotor length | 75.2 in |
| High-speed rotor speed | 3000 rpm |
| High-speed rotor flail quantity | 60 |
| DISCHARGE SYSTEM | |
| Discharge Direction | Right hand |
| Horizontal spread distance | Up to 40 ft (12.2 m) |
| FEATURES | |
| Safety Chain | Optional |
| Torque Protection - Driveline | Shear bolt |
| Scale kit | Optional |
| Material containment kit | Optional |
| Powered sidewall | Optional |
| Square bale kit | Optional |
| Automatic bale feed system | Optional |