Call UsVermeer M8050
Disc Mowers M8050
Overview:
Some say disc mowers are all the same, but it’s the little things that make the difference. Built in Pella, Iowa, the new M8050 disc mower from Vermeer has a cutting width of 10.5 ft (3.2 m) and helps reduce the hassles associated with hooking up, running and maintaining traditional 3-point disc mowers.
It’s differe... + Read More
Features
QUICK HITCH HOOKUP
The Quick Hitch hookup is a one-person hookup: back up your tractor, hook up the disc mower with a quick hitch — and off to the field you go.
TAPERED, LOW-PROFILE CUTTER BAR
A tapered, low-profile cutter bar delivers close, clean cutting — reduces streaking and helps improve performance across a wide variety of crops and conditions. Each self-contained cutter unit comes prepackaged with its own set of gears, bearings and lubricant to help extend operating life. Plus, it’s backed by the Vermeer 3-year cutter bar warranty.
BUILT LOCALLY
Vermeer mowers are built at Vermeer Corporation's global headquarters in Pella, Iowa, where a passion for quality and reliability is present among team members ranging from engineering to production to service.
QUICK-CLIP BLADE RETENTION SYSTEM
Maintenance is made convenient with the Quick-Clip® blade retention system, which lets you change and turn blades in seconds — with no specialty tools required.
Specifications
| Model | M8050 |
| DIMENSIONS AND WEIGHTS | |
| Transport Width - standard | 7.8 ft |
| Transport Length | 6.5 ft |
| Cutting width | 10.5 ft |
| Working width | 10.5 ft |
| working lenth | 6.5 ft |
| Total Weight | 1380 lbs |
| Torqu protection | Driveline: V-Belt |
| TRACTOR REQUIREMENTS | |
| Torque/Hitch | 3-point quick hitch, category II or II N |
| Drive | 540 rpm |
| PTO horsepower recommended | 80 hp |
| Hydraulic requirements | 1 auxilary removte, single-acting |
| Flow Rate | 6 gpm |
| Hydraulic Pressure | 2000 psi |
| Hydraulic flow rate | 6 gpm |
| CUTTERBAR | |
| Cutter bar type | Standard |
| Cut height | 1.3 in -3.9 in (3.2 cm - 9.9 cm) |
| Number of Discs | 8 |
| Disc Diameter | 19.7 in |
| Disc speed | 2850 rpm |
| Number of KnivesBlades | 16 |
| Angle Adjustment | Top-link on 3-point |
| Quick Clip® blade retention system | Sandard |
| Curtain material | 1400 g/m2 polyester woven material with flexible PVC covering |
| 3-year limited cutter bar warranty | Stanard |
| FEATURES | |
| Optional swath formation | Optional crop divider; Optional crop divider and swath wheel combination |
| Skid Shoes | Optional topping skid shoes; Optional wear skids |