Vermeer RR140 Rotary Rake

Double tap to zoom



  • The RR140 rotary rake is capable of making windrows at a minimum of 16 in (40.6 cm) wide and up to 3 ft (0.9 m) wide, depending on the volume of the crop. With 11 arms, each equipped with four double tines, the RR140 is gentle on the crop and allows for air flow through the windrows for quicker dry down.
  • Hydraulic lift and rake adjustments help ensure operators can get up and over windrows and minimize ash content getting raked into the windrow. Two lift cylinders work off of the same circuit to allow the operator to adjust raking height from the seat of the tractor. There is also a manual crank that allows you to set the rake pitch.
  • With a transport width of 6.7 ft (2 m), the RR140’s perimeter guarding on both sides folds directly up and the 11 arms hook into storage locations on the tongue. This provides ability to transport down narrow roads and through gate openings.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.


Dimensions and Weights

Raking Width - Minimum 13.8 ' 4.2 m
Raking Width - Maximum 13.8 ' 4.2 m
Windrow Width - Minimum 16 " 40.6 cm
Windrow Width - Maximum 36 " 91.4 cm
Transport Width 6.9 ' 2.1 m
Transport Length 16.4 ' 5 m
Weight - Total 1800 lbs 816.5 kg
Weight - Tongue 100 lbs 45.4 kg
Tire size 18.8.5-8  
Maximum Speed 7.7 mph 12.4 km/h

Tractor Requirements

Horsepower 40 hp 29.8 kw
Hydraulics - Type 1 single acting  
Hydraulic Pressure 1500 psi 103.4 bar
Hydraulic - Flow Rate 8 gpm 30.3 L/min