Double tap to zoom
OPTIONAL CENTER SPLITTER ATTACHMENT
Adopted from the Vermeer VR-Series carted wheel rakes, the highly popular, optional center splitter attachment provides an exclusive dual rake wheel configuration that gently sweeps and turns the crop in the center of the swath.
Consistent downforce on rake wheels through the entire range of motion for improved tooth life and crop pickup with less dirt content in the windrow than a traditional spring-loaded wheel rake.
EASILY ADJUSTABLE RAKE WHEEL SETTINGS AND PRESSURE
Dual-purpose lift and suspension cylinder on each rake wheel coupled with a nitrogen-charged accumulator for easily changing rake wheel settings and pressure.
ONE-PIECE RAKE ARMS
Unique rake design featuring one-piece rake arms – in conjunction with hydraulic suspension on each rake wheel – provides superior rake flexibility with less maintenance than similar-sized rakes that require a pivot joint and additional caster wheel in the middle of the rake arm.
WIDE RANGE OF MOTION
Superior vertical rake arm travel and ground contour following with the ability to flex 40 in (101.6 cm) down or 66 in (167.6 cm) up, equating to a range of motion of over 8 ft (2.4 m).
|DIMENSIONS AND WEIGHTS|
|Raking width minimum||25 ft|
|Raking width maximum||40 ft|
|Windrow width minimum||36 in|
|Windrow width maximum||72 in|
|Transport Width||12 ft|
|Transport Length||38 ft|
|Transport Height||6.3 ft|
|Total Weight||6780 lbs|
|Tongue Weight||1840 lbs|
|Transport tire size||14L x 16.1|
|Number of Rake Wheels||20|
|Rake wheel diameter||55 in|
|Teeth per wheel||40|
|Tooth diameter||.3 in|
|Rake wheel wind discs||Optional|
|PTO horsepower minimum||60 hp|
|Hydraulic Type||3 double-acting|
|Hydraulic Pressure||1800 psi|
|Hydraulic flow rate||5 gpm|