Double tap to zoom
Q3 CUTTER BAR
The Q3® Cutter Bar is a modular shaft-driven cutter bar that helps to maximize productivity and make the mower more fuel-efficient with minimal gear-to gear interface which can require less horsepower than gear bed style cutter bars. Key features such as the Quick-Clip® Blade Retention System and Quick-Change™ Shear Ring are designed for productivity, functionality and to allow for quick and easy replacement in the field. Access on top of each cutter unit lets the operator check and replace oil quickly.
NITROGEN-CHARGED ACCUMULATOR SUSPENSION SYSTEM
A simple, convenient nitrogen-charged accumulator suspension system makes it easy to adjust for various crops and conditions, and provides better ground following cutter bar balance and a more consistent pitch. The system allows you to establish a setting and charge to that setting every time.
2-POINT QUICK HITCH
A patent-pending, newly designed 2-point Quick Hitch allows for an easy, one-person hook up. It also provides more ground clearance to avoid crop obstructions while in the field. Quick. Simple. Durable.
HYDRAULIC FOLD FOR TRANSPORT
Just because the 10-series trailed mowers offer wide cutting widths, it doesn't mean they have to be a hassle to deal with. The TM1410 hydraulically folds down to a 9 ft (2.7 m) transport width.
OPTIONAL LARGE FLOAT TIRES
Optional 480/45 x 17 large float tires are available for both the TM1210/TM1410 trailed mowers.
TWO INDEPENDENT CUTTER BAR UNITS
Two independent cutter bar units work with the suspension system to allow the mower to flex in uneven ground contour.
|DIMENSIONS AND WEIGHTS|
|Transport Height||76 in|
|Transport width - standard||9.1 ft|
|Transport Length||9.8 ft|
|Cutting Width||25.2 ft|
|Working Height||76 in|
|Working Width||23.9 ft|
|Working Length||19.8 ft|
|Total Weight||6275 lbs|
|Tongue Weight||1820 lbs|
|Torque Protection||Driveline: friction disc clutch|
|Tires||Standard 31x13.5-15; Optional 480/45x17 flotation tire|
|Tongue/hitch||2-point quick hitch with swivel gearbox, category II or III N|
|Drive PTO||540 or 1000 rpm|
|PTO horsepower recommended||95 hp|
|Hydraulic Type||3 double-acting (2 double-acting with optional kit)|
|Hydraulic Pressure||1850 psi|
|Hydraulic flow rate||6 gpm|
|Cutter bar type||Q3®|
|Cut height||1 in - 3 in (2.5 cm - 7.6 cm)|
|Number of Discs||12|
|Disc Diameter||23 in|
|Disc Speed||2690 rpm|
|Number of Blades||24|
|Angle Adjustment||Hydraulic pitch control|
|Quick Clip® blade retention system||Standard|
|Curtain material||1400 g/m2 polyester woven material with flexible PVC covering|
|3-year limited cutter bar warranty||Standard|
|Optional swath formation||Optional swathwheel|
|Skid Shoes||Standard modular independent skid shoes; Optional topping wear skids|