Vermeer VS510 Single-screw
Double tap to zoom
The VS510 single-screw vertical mixer comes with standard 5/8-in (15.9-mm) abrasion-resistant AR200 screw flighting and a full set of hard-surfaced knives for long-lasting performance.
Durability and reliability are key components of Vermeer mixers. That's why they're built with heavy-duty, abrasion-resistant AR200 steel, which is approximately twice as hard as regular steel.
The VS510 is designed to optimize speed and evenness of cleanout with three points of contact with the tub floor (two bi-pulse legs and a leading edge of the screw).
4-point scale with Bluetooth connectivity
Achieve defined targets when feeding in multiple pens with the standard 4-point scale. As an added bonus, operators can view their load weight from their smart device with Bluetooth connectivity.
Optional 2-speed gearbox
With an optional 2-speed gearbox, operators can optimize their mixing and feeding. Use the low side (26 rpm) when mixing or processing large round bales. Use the high side (39 rpm) during the last portion of feeding for optimal cleanout.
Extra heavy-duty planetary
Vermeer mixers feature a heavy-duty planetary — the heart of the mixer. The tractor’s PTO powers the screw through a planetary specifically designed to help extend machine life.
Run out of ground hay? No problem. The VS510 single-screw vertical mixer is the smallest mixer available in the Vermeer product lineup that has the ability to process a 5-ft x 6-ft (1.5-m x 1.8-m) large round bale.
Constant-velocity PTO allows operators to mix the load while traveling down the road or between pens on their farm or ranch.
|DIMENSIONS AND WEIGHTS|
|Loading height - standard||120 in|
|Machine weight - standard||9860 lbs|
|Maximum net load||15000 lbs|
|Total length||214 in|
|Transport width - 50-in folding conveyor extension||118 in|
|Working width - 50-in folding conveyor extension||137 in|
|Tires (retread)||Standard 445/50R-22.5; Optional 445/50R-22.5 lug; Optional 255/70R-22.5 dual|
|TUB AND SCREWS|
|Capacity||510 cu ft|
|Number of screws||1|
|Number of knives per screw||7|
|Tub wall thickness||1/4 in (6.4 mm)|
|Tub wall material||AR200|
|Floor thickness||3/4 in (19.1 mm)|
|Screw flighting thickness||5/8 in (15.9 mm)|
|Screw flighting material||AR200|
|Discharge style||Front conveyor|
|Discharge Direction||Left or right|
|Folding conveyor extension length||25 in/40 in/50 in (64 cm/100 cm/130 cm)|
|Bi-directional conveyor length||101 in/110 in/119 in (257 cm/280 cm/302 cm) OR 101 in (257 cm) hydraulic shift|
|Minimum PTO horsepower||120 hp (70 kW)|
|Recommended PTO horsepower||130 hp|
|Driveline||Standard: 1,000 rpm, CV; Optional: 540 rpm, CV|
|Torque Protection||Shear bolt|
|Screw rpm||39 (1-speed); 39/26 (2-speed)|
|Scale display||Digi-Star EZ2810-BT|
|Number of weigh bars||4|