Call UsVermeer VT830 Twin-screw
Vertical Mixers VT830 Twin-screw
Overview:
High capacity. Low loading height. The Vermeer VT830 twin-screw vertical mixer has what it takes to get your cattle fed.
It's hard to find a mixer with this much capacity at such a low loading height. The Vermeer VT830 twin-screw vertical mixer is the largest model in the lineup available with single tires and a sin... + Read More
Features
Screw design
Not only do producers want a consistent mix, their cows do, too. The twin-screw mixers from Vermeer come equipped with an overlapping screw design and offset baffles along the tub wall. Together, the screws, baffles and tub geometry work together to move material from the front chamber to the back chamber for a thorough mix.
Efficient cleanout
Feed is more valuable in the bunk than left in the tub. That is why Vermeer mixers offer two bi-pulse legs and the leading edge of the screw to form three points of contact with the tub floor to optimize cleanout and minimize feed waste.
Low loading height
At 830 ft3 (23.4 m3), the VT830 twin-screw vertical mixer has an attractive loading height at just 116 in (295 cm). This low loading height provides versatility among different operations with height restrictions during loading, feeding and storage, while also allowing them to have a mixer of this capacity.
Versatile tire options
A large-capacity mixer with versatile options, the VT830 twin-screw vertical mixer gives operators the ability to choose a mixer with single tires or dual tires for use in different ground conditions.
Optional stainless steel liner
For maximized durability, and to help prevent rust, operators can get the optional stainless steel liner on the VT830 twin-screw mixer.
4-point scale with Bluetooth connectivity
The 4-point scale is designed to help producers target and achieve precise rations. With Bluetooth connectivity, operators can view weight readouts directly from their smart device while loading the machine.
Specifications
| DIMENSIONS AND WEIGHTS | |
| Loading height - standard | 116 in |
| Machine weight - standard | 16240 lbs |
| Maximum net load | 21000 lbs |
| Total length | 298 in |
| Transport width - 50-in folding conveyor extension | 117 in |
| Working width - 50-in folding conveyor extension | 135 in |
| Tires (retread) | Standard 425/65R-22.5; Optional 255/70R-22.5 dual |
| TUB AND SCREWS | |
| Capacity | 830 cu ft |
| Number of screws | 2 |
| Number of knives per screw | 6 |
| Tub wall thickness | 1/4 in (6.4 mm) |
| Tub wall material | AR200 |
| Floor thickness | 3/4 in (19.1 mm) |
| Screw flighting thickness | 5/8 in (15.9 mm) |
| Screw flighting material | AR200 |
| DISCHARGE SYSTEM | |
| Discharge style | Front conveyor |
| Discharge Direction | Left or right |
| Folding conveyor extension length | 25 in/40 in/50 in (64 cm/100 cm/130 cm) |
| Bi-directional conveyor length | 101 in/110 in/119 in (257 cm/280 cm/302 cm) OR 101 in (257 cm) hydraulic shift |
| Rear discharge door | Optional |
| TRACTOR REQUIREMENTS | |
| Minimum PTO horsepower | 150 hp (2-speed) (110 kW) |
| Recommended PTO horsepower | 180 hp |
| DRIVE SYSTEM | |
| Driveline | 1,000 rpm, CV |
| Two-speed gearbox | Optional |
| Torque Protection | Shear bolt |
| Screw rpm | 39 (1-speed); 39/26 (2-speed) |
| SCALE SYSTEM | |
| Scale display | Digi-Star EZ2810-BT |
| Number of weigh bars | 4 |
| Bluetooth connectivity | Standard |